Electrician near me in Sturgis SD | Wires R Us

Yes. Sturgis is part of our regular service area and has been since the company started in 1999. Our shop sits on Sturgis Road in Piedmont, which puts our trucks on the Sturgis side of Rapid City rather than across town from it. That matters more than most people expect, because a shorter run from the shop is what lets us commit to a date range and hold it.

We work across the wider Black Hills from the same location, including Rapid City, Spearfish, Belle Fourche, Piedmont, Black Hawk, and Deadwood.

For Sturgis homeowners, the work we take most often is EV charger installation, standby generator installation, electrical panel swaps, 100A, 200A and 400A service upgrades, lighting and LED upgrades, and hot tub wiring.

For builders, our core work is new construction wiring and multi-family and apartment wiring. We are a residential and multi-family shop first, so that is where our crews are strongest.

Yes, and it is one of the jobs we do most in the Sturgis area. A Level 2 charger runs on a 240V circuit and pulls a heavy continuous load, which is different from a normal appliance circuit. The install involves checking whether your existing service has room for the load, sizing the conductors and breaker correctly for a continuous draw, and picking a route from the panel to the charger location that does not cut corners.

If you are going with a plug-in unit rather than a hardwired one, the receptacle itself matters. An EV rated receptacle is built with heavier contacts than a standard 50A outlet because of how long the load sits on it. We stock and install the correct part, not the cheaper lookalike that fits the same box.

Yes. We install, replace, and service standby generator systems for Sturgis homes and shops. A whole home system is more than the generator itself. It includes the transfer switch, the feeder and grounding work, the fuel connection coordination, and the startup testing that proves the system actually picks up the load when the power drops.

Wiring in a generator touches the most dangerous parts of a residential electrical system, which is why we treat the transfer equipment and the service connection as the part of the job that deserves the most attention.

The usual trigger is adding load. An EV charger, a hot tub, a heat pump, a shop with 240V tools, or a basement finish can push an older 100A service past what it can carry. Age is the other signal. A panel that is full, has no room for a new breaker, or uses a brand with a known safety history is worth looking at before you add anything to it.

We look at the existing service, the panel condition, and what you are planning to add over the next few years, then tell you whether a panel swap covers it or whether a full service upgrade is the right call. Doing it once for what you will actually need beats doing it twice.

Yes. Residential new construction is our primary specialty and most of our volume comes from builder relationships, some of which go back more than twenty years. Send us prints and we confirm receipt quickly and ask for your bid-back deadline so the timeline works around your build schedule.

Our bids assume one continuous rough-in trip. We do not leave the job partway through rough-in and come back later, because that is where most schedule slip on the electrical side comes from. Trim is planned as two trips. If you want to talk through a project, start on our contractor and GC contact page.

Lead time moves with the season and with what the job involves, so call and we will give you a real date range instead of a vague one. What does not move is that we hold the range we commit to. Showing up when we said we would is the thing our builders and homeowners bring up most, and it is the reason our crews stay busy.

If something on the job needs to be corrected, we stay on it and take care of it. We take responsibility for our own work. You are not left chasing a list of problems.

Yes. Older Black Hills homes turn up aluminum branch circuit wiring, panels from manufacturers with documented safety problems, ungrounded circuits, and connections that have loosened over decades of heating and cooling. Each of those has a correct fix, and each one has a shortcut that makes it look fine while leaving the actual hazard in place.

We evaluate what is there before we add to it, because adding new load to a system with an underlying problem is how small issues turn into expensive ones.

We run wire the same way on every job. Our crews use one consistent routing method, so anyone who comes behind us, whether that is another trade during the build or an electrician ten years from now, can find a wire on the first hole instead of the fourth. That consistency is also why our job sites stay clean and why our work is recognizable on sight to the builders we work with.

On larger projects we can also 3D scan the home before drywall, which gives you a record of exactly where everything runs.

Yes. We offer flexible financing through Affirm with monthly payment terms over 12, 24, or 36 months, which most people use for the bigger ticket items like a standby generator, an EV charger install, or a panel and service upgrade. Approval is quick and happens before the work is scheduled. You can read the details on our electrical financing page.